Walker Filter Cleaning Kit

CLEANING AND OILING YOUR FILTER:  

• Remove filter from engine. Gently tap filer or us a soft bristled brush to remove any loose debris.
  

• Inspect filter for damage or wear.
  

• Spray a liberal amount of cleaner solution on the filter and let it sit for 8 to 10 minutes to allow the cleaner to work on the grime.
  

• Rinse filter gently with water. DO NOT use high pressure nozzles or a pressure washer. Normal water pressure from a sink or hose is all that is needed. Rinse filter until you no longer see soap residue rinsing from the filter.
  

• Place the filter in the sun or someplace dry. You need to allow enough time for the filter to dry completely. NEVER use compressed air to dry filters.
  

• Once the filter is dry, apply the filter oil. This is done by applying a bead of oil around the circumference of the filter about 1/4 way down from each edge. (see image below)
  

• Let the filter sit for approx. 1 hour and the oil should have wicked through the filter to cover the un-oiled areas. If there are areas where the oil didn't cover well, put a few drops in that area to complete oiling.
  

• Your filter is now ready to re-install on the engine.